Dunlop Air Suspension, fitting made easy guide
Member Techno100 has produced the following information about self fitting Dunlop Air Suspension:
For this job you will need:
- Some additional ground clearance (Milenco Quattros ideal)
- A long handled torque wrench
- Hammerite Waxoyl to coat all metal parts during assembly
- A tape measure for LSV (load sensing valve)
- 1/2" drive sockets 13,17,22mm
- Hammer, cold chisel, sidecutters, stanley knife, battery drill, 8mm HSS bit
Begin with the rod measurement at the LSV as this may alter with the suspension upgrade and need to be adjusted later, BEFORE driving.
Register to read more …
×
To install this Web App in your iPhone/iPad press icon.
And then Add to Home Screen.
×
Install Web App
Offline - No Internet Connection
Offline - No Internet Connection